Brand: Luxtension
The telescopic lighting column type LUX 4.1.3 is a complete lighting column and is supplied as a complete set. This telescopic light pole has a total extended length of 4.1 meters and is made up of 3 tube segments. This light tower type LUX 4.1.3 is very suitable for recovery vehicles, fire engines, ...
| Standard brightness : | 31,000 Lm |
| Standard Lighting: | 2 x LED 216 watts |
| Operation : | Radiographic with remote control |
The telescopic lighting column type LUX 4.1.3 is a complete lighting column and is supplied as a complete set. This telescopic light pole has a total extended length of 4.1 meters and is made up of 3 tube segments. This light tower type LUX 4.1.3 is very suitable for recovery vehicles, fire engines, defense vehicles and emergency services in general.
The standard supplied lighting panel consists of a set of LED lamps of 216 watts each. The light output of these lamps is 15,500 Lm and that with a power of only 216 W. If you choose to use both lamps during the work, these lamps give a light value of 31,000 Lm. The mast can rotate 360° and thus always provides the correct ambient lighting around the vehicle and in the work area.
Big advantage of Luxtension’s light towers is that they work on 12/24 Volts. Therefore, an inverter is not necessary!
The Telescopic light pole LUX 4.1.3 can be supplied with remote control. You can then control the mast radiographically up to a distance of 100 meters.
Delivery includes:
- Light pole
- 2x 15,500 Lm LED lamps
- Air pressure operation
- Switchboard
- Remote control
- Fasteners
| Standard brightness : | 31,000 Lm |
| Standard Lighting: | 2 x LED 216 watts |
| Operation : | Radiographic with remote control |
| Voltage : | 12-24 Volt |
| Total length when folded: | 1798 mm |
| Total length unfolded: | 4085 mm |
| The minimum height above the roof: | 308mm |
| Maximum height above the roof: | 2595mm |
| Installation length: | 1490mm |
| Mounting options: |
|
